 |
|
|
|
| T-8A SPECIFICATIONS |
| Travel X Axis |
8.66” (220mm) |
| Travel Z Axis |
25.60” (650mm) |
| Rapid Feed Rate X Axis |
472ipm |
| Rapid Feed Rate Z Axis |
787ipm |
| Positioning X Axis |
0.0004” / 4” |
| Positioning Z Axis |
0.0008” / 12” |
| Repeatability X & Z Axis |
±0.0001” (±0.003mm) |
| Swing Over Bed |
21.65” (550mm) |
| Swing Over Carriage Cover |
12.99” (330mm) |
| Maximum Turning Diameter x Full Length |
13.78” x 25.59” (350mm x 650mm) |
| Spindle Center Height |
37.40” (950mm) |
| Spindle Nose |
ASA A-2-8 |
| Spindle Bore |
3.43” (87mm) |
| Bar Capacity |
2.95” (75mm) |
| Spindle Motor |
FANUC 30P Spindle Motor |
| Spindle Horse Power |
25 HP |
| Spindle Speed |
3500 RPM |
| Servo Drive Motor X & Z Axis |
Fanuc Motor |
| Turret Tool Disk Diameter |
12.52” (318mm) |
| Turning Tool Shank Size |
1.00” |
| Boring Bar Holder Size |
1.50” |
| Turret Index Time (Station to Station) |
0.8 Seconds |
| Tailstock Quill Traverse |
4.92” (125mm) |
| Tailstock Quill Diameter |
3.74” (95mm) |
| Tailstock Quill Taper |
M.T. 5 |
| Floor Space |
78.74”x139.76”x77.17” (2000mmx3550mmx1960mm) |
| Power Requirement |
220V, 3 Phase, 60Hz, 30kVA, 75Amp |
| Machine Weight |
11,000 lb (5000 kg) |
Specification and design characteristics are subject to change without prior notice.
|
|
|
|
|
|
|
