T-8 SPECIFICATIONS
Travel X Axis
8.66” (220mm)
Travel Z Axis
25.60” (650mm)
Rapid Feed Rate X Axis
472ipm
Rapid Feed Rate Z Axis
787ipm
Positioning X Axis
0.0004” / 4”
Positioning Z Axis
0.0008” / 12”
Repeatability X & Z Axis
±0.0001” (±0.003mm)
Swing Over Bed
21.65” (550mm)
Swing Over Carriage Cover
12.99” (330mm)
Maximum Turning Diameter x Full Length
13.78” x 25.59” (350mm x 650mm)
Spindle Center Height
37.40” (950mm)
Spindle Nose
ASA A-2-6
Spindle Bore
2.44” (62mm)
Bar Capacity
2.05” (52mm)
Spindle Motor
FANUC AC Spindle Motor
Spindle Horse Power
25 HP
Spindle Speed
4500 RPM
Servo Drive Motor X & Z Axis
Fanuc Motor
Turret Tool Disk Diameter
12.52” (318mm)
Turning Tool Shank Size
1.00”
Boring Bar Holder Size
1.50”
Turret Index Time (Station to Station)
0.8 Seconds
Tailstock Quill Traverse
4.92” (125mm)
Tailstock Quill Diameter
3.74” (95mm)
Tailstock Quill Taper
M.T. 5
Floor Space
78.74”x139.76”x77.17” (2000mmx3550mmx1960mm)
Power Requirement
220V, 3 Phase, 60Hz, 30kVA, 75Amp
Machine Weight
10,340 lb (4700 kg)
Specification and design characteristics are subject to change without prior notice.
Standard Accessories
Fanuc Oi-TC
Fanuc 25 HP Spindle Motor
AC Digital Servo & Spindle Drivers
8” 3 Jaw Hydraulic Chuck
10 Station Servo Driven Turret
Spindle Speed 4500 RPM
PCMCIA Slot for Memory Expansion
Chip Conveyor & Cart
Harden & Ground Steel Box Ways
Programmable Tailstock Quill
Meehanite Cast Iron Bed, Base & Headstock
Auto Lubrication System
Heat Exchanger for Electrical Cabinet
Pitch Error Compensation
Automatic Power off (M30)
RS232 Interface
Differential Bed Ways Configuration
Tool Kit / Work Light
Fanuc Operating & Maintenance Manual
Operating & Electrical Manuals
One Year Machine Parts Warranty
Two Year Control Warranty
Optional Accessories
Parts Catcher
Auto Tool Setter
Auto Door Open/Close
Boring Bar Bushing (Set) 1/2, 5/8, 3/4, 7/8, 1, 1 1/4, 1 1/2
Morse Taper Bushing (Set) MT#2, MT#3, MT#4
Soft Jaw 8” Chuck (Pointed)
Soft Jaw 8” Chuck (Flat)
5C Collet Chuck A2-6 Overall Length 5” Capacity 1 1/16”
5C Collet Chuck A2-6 Overall Length 6” Capacity 1 1/16”
16C Collet Chuck A2-6 Overall Length 6” Capacity 1 5/8”
3J Collet Chuck A2-6 Overall Length 6” Capacity 1 ¾”
