VH-650L3 Specification
HEADSTOCK
Spindle Speed 60~8000R.P.M.
Spindle Motor 15 HP
Spindle Diameter ø2.5"                        (ø65mm)
Spindle Taper CAT-40                     (BT-40)
TABLE
Table Size 31.4"x17.7"               (800mmx450mm)
Max. Load Permissible 880 lbs                     (400kg)
T-Slot No./Pitch 3/4.9"                       (3/125mm)
T-Slot Width 0.7"                         (18mm)
TRAVEL
 X Axis 25.5"                       (650mm)
 Y Axis 19.6"                       (500mm)
 Z Axis 20.4"                       (520mm)
Spindle Nose to Table 4.7"~25.5"               (120mm~650mm)
Throat Depth from Spindle Center to Column Rail Face 21.2"                       (540mm)
Column Rail Face to Table Center 11.4"~31.1"             (290mm~790mm)
AXIS FEED
Rapid Feed Rate X, Y Axis 944.8"/min               (24000mm/min)
Rapid Feed Rate Z Axis 944.8"/min L3          (24000mm/min)
590.5"/min L            (15000mm/min)
Cutting Feed Rate 196.8"/min               (5000mm/min)
ATC SYSTEM (CAROUSEL)
Max. Tool Diameter 3.15"                       (80mm)
Max. Tool Length 11.8"                       (300mm)
Max. Tool Weight 15.4 lbs                   (7kgs)
GENERAL INFORMATION
Machine Wt. (approx.) 10,978 lbs               (4990kg)
Floor Space (WxDxH) 98.7"x85.5"x106.2" 
               (2508mmx2180mmx2700mm)
Positioning ±0.0002"/11.8"        (±0.005mm/300mm)
Repeatability ±0.0001"                 (±0.003mm)
Air Power Required 85 PSI                    (6kg/cm2)
NOTE: L3 MODE: Employs THK NR series linear motion guides on X, Y-axis, and THK HSR series on Z-axis.

Specification and design characteristics are subject to change without prior notice.


Standard Accessories

  • Coolant system
  • Work lamp
  • Spindle air blast
  • Rigid tapping
  • Automatic power off
  • Carousel type ATC (16 Tools)
  • Fully enclosed splash guard
  • Leveling bolts and pads
  • Automatic lubrication system
  • Tool box with adjustment tools
  • RS-232 interface
  • CNC controller
    • Fanuc 0iM-B Package B
  • cabinetFloating tool unclamp
  • 4th axis wiring ready
  • Remote MPG control
  • One year machine parts warranty
  • Two years controller warranty



Optional Accessories

  • 10,000/12,000 P.P.M. spindle
  • Heat exchanger for electrical
  • Chip conveyor and cart
  • Side mount arm type ATC(24 tools)
  • Carousel  type ATC (20 tools)
  • 2-speed gearbox
  • Coolant through spindle with filter system
  • Coolant through tool holder
  • Water curtain device
  • CNC Controller
    • Mitsubishi 64M/65M
    • Fanuc 18M/21i
  • 4th axis rotary table
  • Spindle cooler
  • Transformer(15KVA)