 |
|
|
|
|
VH-850L3 SPECIFICATIONS
|
| Travel X Axis |
33.46” (850mm) |
| Travel Y Axis |
19.69” (500mm) |
| Travel Z Axis |
20.47” (520mm) |
| Rapid Feed Rate X & Y Axis |
945ipm |
| Rapid Feed Rate Z Axis |
945ipm |
| Cutting Feed Rate |
196.85ipm (5000mm/min) |
| Positioning X, Y & Z Axis |
0.0001/12” (0.005mm / 300mm) |
| Repeatability X, Y & Z Axis |
±0.0001” (±0.003mm) |
| Table Dimension |
39.37” x 17.72” (1000mm x 450mm) |
| Maximum Loading |
990 lb (450Kg) |
| Spindle Motor |
FANUC AC Spindle Motor ßiI 8 / 8000 |
| Spindle Horse Power |
15 HP |
| Spindle Speed |
8000 RPM |
| Spindle Taper |
CAT-40 |
| Servo Drive Motor X & Y Axis |
Fanuc ß 12 / 3000is |
| Servo Drive Motor Z Axis |
Fanuc ß 22 / 3000is |
| Distance from Spindle Nose to Table |
4.72” – 25.59” (120 – 650mm) |
| Distance from Spindle to Column |
21.26” (540mm) |
| ATC |
Swing Arm Type Random, Shortest Path, Bi-Directional |
| Magazine Capacity |
24 Tools |
| Tool Change Time |
2.5 Second |
| Maximum Tool Weight |
15.4 lb (7.0kg) |
| Maximum Tool Length |
11.81” (300mm) |
| Maximum Tool Diameter |
3.14” (80mm) |
| Floor Space L x W x H |
99”x98”x106” (2508mmx2408mmx2700mm) |
| Power Requirement |
220V, 3 Phase, 60Hz, 30kVA, 75Amp |
| Machine Weight |
11,330 lb (5150 kg) |
NOTE: L3 MODE: Employs THK NR series linear motion guides on X, Y-axis, and THK HSR series on Z-axis.
Specification and design characteristics are subject to change without prior notice.
|
|
|
|
|
|
|
